Ebike Pedal Assist Sensor 12 Signals for KT Controller PAS Sensor 12 Magnets E Bike Senssor
$33.72
In stock
SKU
FED11412
- Corresponding distance:2-3mm
- Hall Electric Life:>20M times
Important:
- Please notice that our this PAS sensor is KT brand,only compatible with KT controller.
- If use with other controllers,maybe can't work.
Pedal Assist Sensor Feture:
- Type : Dual Hall PAS Sensor for KT Controller
- Notice:KT display setting C1=7
- Installation : Left side
- Voltage : Use with 36V,48V KT contoller
- Magnet : 12 Magnets
- Cable Length : 90cm not include the sensor and connector
- Connector : 3Pin SM Connector,not waterproof
- Corresponding time when brake:<0.001S
- Corresponding distance:2-3mm
- Hall Electric Life:>20M times
This Pedal Assist Sensor Feature:
- Output 12 signals with fast power-assist response speed, and it can automatically identify the positive rotation and the reverse rotation of the pedal;
- When coupled with a two part magnet disc it dose not require the crank assemble to be disassembled to install.
How to install:
- Pedal assist sensor uses the left installation mode, during the installation,
- It's simple,dose not require the crank assemble to be disassembled to install.
- Magnet plate assembly should plug the two pieces of magnetic steel plate, which is then fixed by using a circlip.
- The assembled magnetic steel plate is as shown below.
In Feed | Yes |
---|
Write Your Own Review