Redcon DM6F DMSS 2.4G 6 Channel 6ch Receiver for Rc Helicopter Park Flyer JR XG7/XG8

Redcon DM6F DMSS allmax 2.4G 6 Channel 6ch Receiver for Rc Helicopter Park Flyer JR XG7/XG8/XG11 ADMS

Specifications:

• Band: 2.4GHz
• Weight: 40g
• Modulation:DMSS
• Voltage Range: 3.6-9.6v
• Antenna Length Main RX: 170mm
• Type: 6-Channel DMSS Receiver
• Dimensions (W x Lx H): 18.5x 43.5x 9.5mm
• The receiver must be bind with the transmitter before it will operate.
• 1. Connect the battery( or BEC/ ESC with BEC output) to Batt.channel and note the LED on the receiver should flashing, now, the receiver is on bind mode.
• 2. Power on the transmitter, and enter the BIND menu.(Checking manual of your transmitter,how to enter the BIND menu. )
• 3. Press the BIN button on the display. The system will connect within a few seconds. Once connected, the LED on the receiver will go solid, indicating the system is connected.
• 4. Exiting from the BIND menu, and then setting the failsafe according the function of your tansmitter.(Please check failsafe function of your transmitter)

Caution:

• DO NOT stick or apply the receiver antenna to Carbon or Metal material directly, as it will
• For receivers with multi-antennas, it is recommended that each antenna be applied at 90 degrees to each other.
• For receivers with single antenna, please apply the antenna far away from any carbon, metal or electronic equipment as possible.

Package including:

• Receiver *1