Redcon DM6F DMSS 2.4G 6 Channel 6ch Receiver for Rc Helicopter Park Flyer JR XG7/XG8
$27.00
In stock
SKU
FED10309
Redcon DM6F DMSS allmax 2.4G 6 Channel 6ch Receiver for Rc Helicopter Park Flyer JR XG7/XG8/XG11 ADMS
Specifications:
- Band: 2.4GHz
- Weight: 40g
- Modulation:DMSS
- Voltage Range: 3.6-9.6v
- Antenna Length Main RX: 170mm
- Type: 6-Channel DMSS Receiver
- Dimensions (W x Lx H): 18.5x 43.5x 9.5mm
- The receiver must be bind with the transmitter before it will operate.
- 1. Connect the battery( or BEC/ ESC with BEC output) to Batt.channel and note the LED on the receiver should flashing, now, the receiver is on bind mode.
- 2. Power on the transmitter, and enter the BIND menu.(Checking manual of your transmitter,how to enter the BIND menu. )
- 3. Press the BIN button on the display. The system will connect within a few seconds. Once connected, the LED on the receiver will go solid, indicating the system is connected.
- 4. Exiting from the BIND menu, and then setting the failsafe according the function of your tansmitter.(Please check failsafe function of your transmitter)
Caution:
- DO NOT stick or apply the receiver antenna to Carbon or Metal material directly, as it will
- For receivers with multi-antennas, it is recommended that each antenna be applied at 90 degrees to each other.
- For receivers with single antenna, please apply the antenna far away from any carbon, metal or electronic equipment as possible.
Package including:
- Receiver *1
In Feed | No |
---|
Write Your Own Review